Magnetic car mounts are everywhere these days. They make it easy to snap your phone into place while driving, but do they work with MagSafe?

What is a Magnetic Car Mount?

A magnetic car mount is exactly what it sounds like—a phone holder that uses magnets to keep your phone in place. Instead of gripping your phone with clamps, it uses strong magnets to hold it securely.

Most magnetic mounts attach to your car’s dashboard, air vent, or windshield. Some need a metal plate on your phone or case, while newer ones—like MagSafe-compatible mounts—work with built-in magnets. The type of mount you choose matters because different designs affect usability, wireless charging, and phone compatibility.

One key factor to consider is the strength of the magnet. Weak magnets might not hold your phone securely, especially on bumpy roads, while overly strong magnets could make it hard to remove your phone quickly. The best mounts strike a balance—strong enough to hold firm but easy enough to detach when needed.

Why Use a Magnetic Car Mount?

1. Easy to Use
One of the biggest reasons people prefer magnetic mounts is their simplicity. With traditional clamp mounts, you have to adjust the arms or press buttons to release your phone. Magnetic mounts eliminate that hassle—just place your phone against the mount, and it locks in place instantly.

2. Strong Hold
Good magnetic mounts keep your phone in place, even on bumpy roads. Some can hold over 1kg, so your phone isn't going anywhere. This means no worrying about your phone slipping off when you hit a pothole or take a sharp turn. A strong hold also means fewer distractions while driving.

3. Adjustable Viewing
Most mounts let you tilt and rotate your phone. Whether you want it upright for maps or sideways for music, you can adjust it easily. Being able to tweak the angle means less glare on the screen and a better view, no matter where the sun is.

4. Less Clutter
Traditional mounts can be bulky and take up space. Magnetic ones are smaller and blend into your car's interior better. A sleek mount keeps your dashboard looking clean instead of cluttered with clamps and bulky holders. Plus, it's easier to remove if you ever need to switch cars or reposition it.

5. One-Handed Operation
A magnetic mount makes it simple to grab or place your phone with one hand. This is especially useful if you're stopped at a light and need to check something quickly. Traditional holders often require two hands—one to open the clamp and another to place the phone. With a magnetic mount, you just lift it off or set it back in place.

Do Magnetic Car Mounts Work with MagSafe Cases?

Yes, but not all of them work the same way.

Older magnetic mounts need a metal plate, which blocks MagSafe. That means your MagSafe charger won't work if you have the plate stuck to your phone.

But the good thing is that there are some magnetic car mounts compatible with MagSafe. They have built-in magnets that line up perfectly with MagSafe iPhones and cases, so you don't need a metal plate.

However, not all MagSafe mounts are created equal—some may use weaker magnets that don't hold as well. Look for mounts that specifically mention strong MagSafe compatibility to ensure your phone stays put.

Will a Magnetic Car Mount Damage My Phone?

No, your phone will be fine. Some people worry that magnets can mess with their phone's screen, battery, or GPS. But modern smartphones aren't affected by small magnets like these.

Your photos, apps, and touch screen won't be damaged. GPS and Bluetooth also work normally. Magnetic mounts are designed to be safe for phones, so there's nothing to stress about.

Do Magnetic Car Mounts Interfere with Wireless Charging?

It depends on the mount. Older magnetic mounts (the ones that need metal plates) can block wireless charging. That's because the metal plate sits between your phone and the charger.

MagSafe-compatible mounts are different. They're designed to let power pass through while still holding your phone securely.

What's the Best Magnetic Car Mount?

If you want something strong, MagSafe-friendly, and great for wireless charging, the PITAKA MagEZ Car Mount Pro 2 Qi2 is a great pick.

1. Super Strong Hold

This mount holds up to 1.2kg, which means even larger phones stay put, even on rough roads. No slipping, no sliding.

2. MagSafe Compatible

Works perfectly with MagSafe cases, so you don't need extra metal plates. Just snap your phone on, and it holds tight.

3. Fast Wireless Charging

It's Qi2-certified, so you get up to 15W fast charging while driving. No need to plug in your phone—just mount and charge.

4. Built-in NFC Shortcuts

This mount has three customizable NFC shortcuts built in. You can set them up to:

• Open Google Maps or Apple Maps when you place your phone on the mount.
• Start your favorite playlist on Spotify or Apple Music.
• Enable Do Not Disturb mode so notifications don't distract you.

Of course, the above actions are just examples. You can configure any apps or actions you like.

5. Minimalist Design

No bulky arms or extra pieces. It's sleek, modern, and blends into your car interior. Looks clean, and works great, too.

Conclusion

Magnetic car mounts make life easier. They hold your phone securely, keep your hands free, and—if you pick the right one—can even charge your phone.

If you're looking for a reliable option, the PITAKA MagEZ Car Mount Pro 2 Qi2 is one of the best choices out there. It's strong, charges fast, and even lets you set up handy shortcuts with NFC. Check it out!